Hanging a towel rack isn’t terribly difficult, but it can be a bit confusing without the right tools and knowledge. But don’t fret! With a few tips, you’ll be a master of towel rack installation in no time. Here’s what to expect:
Difficulty Level: Easy
Cost: $10 – $20
Duration: 1 hour
Installing a towel bar is fairly straightforward, takes about an hour, and generally costs less than $20. Read on to learn all about towel rack installation!
Before Getting Started
Before we explain how to install a towel bar, here are some things to consider before starting:
- Know your wall type, which can impact the way you install the towel bar.
- Decide whether to use drilling methods for a secure installation or alternative methods for non-drill options.
- Select the ideal location for the towel bar to ensure convenience and aesthetics.
- Don’t rush through the process, carefully mark its position, and take caution when installing.
Now you’re ready to get your bathroom looking fantastic. Whether you’ve got a full bathroom complete with a vanity and floor-length mirror or just a tiny half bath, a towel bar will help pull things together. Let’s get started!
Tools and Materials
- Towel bar kit
- Level
- Pencil
- Drill and drill bits
- Wall anchors (if drilling)
- Screwdriver
- Measuring tape
- Towels (to clean up any mess)
How to Install a Towel Bar
If you choose to install a towel bar by drilling into the wall, follow these steps:
1. Measure and Mark The Wall
Measure what height you’d like to hang your towel rack at and mark it with a pencil. Make sure to mark where both parts will be drilled into the wall. If you have a no-drill towel bar, please see the section below.
2. Drill
If you’re using wall anchors, drill holes at the marked positions. Insert wall anchors if applicable.
3. Secure The Brackets
Attach the brackets or mounting plates to the wall using screws or anchors. Make sure they’re tightly fastened. This will ensure your towel rack is installed securely.
4. Mount The Bar
Finally, mount the towel bar onto the brackets, and secure it in place. Double-check that it’s level, and adjust if necessary.
How to Install a Towel Bar Without Drilling
If you prefer not to drill when hanging your towel rack, here are some tips for hanging a towel bar without drilling:
- Follow the same steps as when drilling. Mark where the bar will be placed.
- Instead of drilling, use adhesive tape, putty, or velcro to attach the bar.
- Be aware that a bar secured without screws may be less stable.
Need Help Hanging a Towel Rack?
If you’re unsure about tackling this project yourself, hire a Tasker to help out! Taskers are experienced and ready to help with any DIY project, large or small. Find help today!
